Powered by Squarespace


This form does not yet contain any fields.




    Thrift Store Find: Kalimar 3D

    This is a Kalimar 3D camera which was made for creating lenticular 3D photographs. The photo printers that made the lenticular prints are long gone, but you can make some interesting animated GIFs with the 3 images.


    Pinhole Camera Experiment: Cashew Can






    I've been wanting to experiment with pinhole cameras. For my first camera, I thought I would make a traditional shoebox pinhole camera using paper negatives, but I was unable to find a simple shoe box that would do. I decided to try making a camera with what I had on hand. I found a cashew can that looked like it might make a good camera.

    The pinhole was made on .002" brass shim stock I picked up at my local hardware store. Instead of painting the tin black inside, I happened to have some heavy black paper stock on hand. It was cut down, fitted and taped to the inside and lid of the can.

    I made the pinhole using a #10 beading needle that I picked up a bead store. It measures out to be .019" as measured with a micrometer. I'm not sure if that is the appropriate size for my can, but I decided for my first experiment, I wouldn't worry about it.

    With the black paper in the lid and the wide lip, which was also covered with black masking tape, I am hopeful I can get away with not having to tape up the lid, but I will have to test the camera for light tightness.

    The can will take a paper negative, 2x8inches. I need to test the pinhole size by making some test exposures, but unfortunately, the weather forecast expects it to be raining all week, so that will have to wait until we get some sun. I could make some exposures in the overcast, but I would rather wait until it is sunny, when it would be quicker to make consecutive test exposures to nail down the correct exposure.


    Thrift Store Find: Holga 120N (modified with rewind knob for 35mm film)

    I found this modified Holga 120N at a thrift store. I was suprised to see an extra knob on the bottom of the camera when I picked it up. It is a rewind knob from another Holga that has been mounted to the bottom of the camera to rewind the 35mm film without having to go into a darkroom, or put the camera in a film changing bag. The blue tape was on the camera when I found it. The counter window has been blocked out and  the winder knob has some markings to help the shooter figure out how far to wind. A bit of sponge in the film compartment keeps the 35mm cassette in position.

    I don't know who did the original mod, but it is cleanly and elegantly done. I may have to try doing this mod myself.


    Thrift Store find: Pokemon 35mm Film Camera

    This is a Pokemon 35mm film camera. It comes with a plastic mask that adds a border of Pokemon characters on the around the edge of the photo. 


    Thrift Store Find: Lomography Fisheye 2

    I had a good week finding cameras at my local thrift stores. This time, it's a Lomography Fisheye 2 camera. It sports a fisheye lens, with a built-in flash and multiple exposure capability.